DigiPos PowerPoS Technical Manual Download Page 72 | Manualshive

Page: 72 / 82

background image

DigiPoS PowerPoS Technical Manual

LAN Port

Testing of a LAN connector and its output requires specialist equipment. If you suspect a
problem with the LAN socket of your DigiPoS, please try the following first before
contacting PC-PoS:

•

Check to see if the connector is firmly inserted into the socket and latched.

•

Check to see that the connector is free from damage or dirt.

•

Make certain that the cable is in good condition (Please note that any bends

smaller than 10 times the diameter of the cable can cause internal damage to the
cable not easily seen from the exterior)

•

Check the Hub or Switch port where the cable is connected to see if there is any

indication of a ‘link‘ light or any other problem.

Parallel Port

An incorrect setting in the BIOS causes most parallel port problems. Before you connect
the device, please check the device manual and see if the device requires an SPP, EPP
or an ECP port.
If the port is set correctly, the next option is to try another device through the diagnostics
similar to the procedures described above for COM port testing.
Should the parallel port fail this test, please contact DigiPoS Systems to have a full
diagnostic workup on the DigiPoS to find the cause of the problem.

RJ12 Cash Drawer Loop Through

If there is a problem suspected with these connectors, connect the cash drawer directly
into the base of the printer and conduct a cash drawer fire test (either through the
Diagnostics or via other software). If this resolves the problem, please contact DigiPoS
Systems. If it does not, there is either a problem with the cash drawer or the PoS printer.

Sound Connectors

The only diagnosis available with these connectors is to try another output device such as
headphones that is known good. If this proves unsuccessful, please contact DigiPoS
Systems for further instructions.

USB Connectors

The only diagnosis available with this port is to try another device with a known good unit.
If this proves unsuccessful, the DigiPoS unit will have to be returned to DigiPoS Systems
for further investigation.

Page 72 of 82

«
...
70
71
72
73
74
...
»

Summary of Contents for PowerPoS



















































































Reviews:

No comments

Related manuals for PowerPoS

Brand: Baaske Medical Pages: 40

EBOX-335xDX3 Series

Brand: DMP Electronics Pages: 40

TRS-80 Model 100

Brand: Radio Shack Pages: 210

Brand: Aaeon Pages: 64

Brand: Prentke Romich Company Pages: 36

Brand: IWILL Pages: 72

InBox300 Series

Brand: InHand Pages: 28

Brand: AWOW Pages: 4

Brand: Rasmus Althoff Pages: 32

Brand: Larson Electronics Pages: 2

Brand: MSI Pages: 60

Brand: MSI Pages: 64

Brand: Curtiss-Wright Pages: 72

Brand: National Instruments Pages: 37

Brand: Shuttle Pages: 1

Brand: Shuttle Pages: 24

Brand: ZAHNER Pages: 24

Brand: Aaeon Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands