LCD Keypad 15
Figure 6.3: Example C
If we change Bonnie’s Access
Level to 02 and she presents her
card to the reader on Door 02 on
Tuesday, August 3 at 3 p.m., she
will be denied access.
7.0 TROUBLE DISPLAY
If your system experiences any
problems,
“Trouble(s) [TRBL] to
View”
will appear on the LCD
screen. The Trouble Display will
only display the troubles that
occur in the area(s) to which the
keypad has been assigned.
Potential troubles have been
sorted into eight groups. Only the troubles which are relevant to you are listed and described below. If a trouble that is
not described or listed below appears, contact your Installer.
We strongly suggest that if any troubles occur, contact your Installer immediately to have your
system serviced.
7.0.1
G
ROUP
1: S
YSTEM
AC Failure
The control panel has detected a power failure. This means that your system is running on the backup
battery. If this trouble occurs when your establishment is not experiencing a power failure, call your
Installer for repairs.
Battery Trouble
The backup battery is disconnected, needs to be recharged, or replaced.
Bell Absent
The system has detected that the bell or siren is not connected.
7.0.2
G
ROUP
5: Z
ONE
T
AMPER
The zone(s) that was tampered with will be displayed on the LCD screen.
7.0.3
G
ROUP
6: Z
ONE
L
OW
B
ATTERY
If a wireless device's battery needs to be replaced, the zone that is assigned to the device will be
displayed on the LCD screen.
7.0.4
G
ROUP
7: Z
ONE
F
AULT
A wireless device is no longer communicating with its receiver, or a connection or CleanMe
TM
trouble is
occurring with your smoke detectors.
7.0.5
G
ROUP
8: C
LOCK
L
OSS
The time and date have been reset to the default. This is the only trouble that we recommend that you
correct.
“Clock Loss [8] to Set”
will appear on the LCD screen after you press the
[
TRBL
]
button. Refer to
section 8.3 on page 17 to set the time and date.
How do I view the Trouble Display?
1) Press the
[
TRBL
]
button when
“Trouble(s) [TRBL] to View”
appears on the
LCD screen. The Group Heading with the trouble will appear on the screen.
2) Press the
[
S
]
and
[
T
]
buttons to scroll between the Groups experiencing a
trouble.
3) Press the
[
NUMBER
]
of the Trouble you wish to view.
Summary of Contents for DGP2-641
Page 1: ...LCD Keypad DGP2 641 System Manager s Manual Also includes Operating Instructions ...
Page 2: ......
Page 31: ......