Digiplex DGP2-641, System Manager'S Manual, Page: 13 / 32

LCD Keypad 11
Users are able to perform actions (arming, disarming, etc.) only in the area(s) they are
assigned. To assign an area(s) to a User Access Code, enter the number corresponding
to the area you wish to assign (i.e.
[1] = area 1, ... [8] = area 8).
Press the [ T ] button to return to the User Options; press the [ S ] button to proceed to
step 8; or press the [
ENTER
] button to save and exit programming mode.
NOTE: If no area is assigned, and if PGMs are programmed by your Installer, the User
can only control the PGMs. Refer to section 8.1 on page 16 for a more detailed
explanation of PGMs.
A) Enter the 2-digit Access Level (i.e. 00, 01,...15) within the first set of brackets.
An Access Level determines which Access Control Doors a User is allowed to pass
through. There are 16 possible Access Levels which are usually programmed by your
Installer. If you wish to program the Access Levels yourself, you will need the NEware
Software which is available through your Installer. Access to all Access Control Doors is
Access Level 00.
B) Enter the 2-digit Schedule (i.e. 00, 01,...15) in the second set of brackets.
Schedules , programmed by your Installer, determine the hours, days, and holidays that
Users are permitted through Access Control Doors. Each user is assigned a Schedule
through the User Access Code. To provide access at all times, assign Schedule 00.
Program the Access Control User Options by pressing the number on your keypad that
corresponds to the Option you wish to assign. The option is considered ON when the
number appears within the brackets. For a detailed description of the User Access
Control Options, refer to section 5.8 on page 12. Press the
[ S ] button to proceed to step
10.
Option [1] : Access Card is Activated
Option [2] : Can Disarm with Access Card
Option [3] : Extended Unlocked Period
Options [4] and [5] : Arming with Card
[4] ON, [5] OFF = Regular Arm
[4] OFF, [5] ON = Stay Arm
[4] and [5] ON = Force Arm
[4] and [5] OFF = Disable the Arming with Card feature
Option [6] : Add Tolerance Window to Schedule
Option [7] : Code Follows Schedule
Option [8] : Card to Unlock and Code to Disarm
Enter the Access Control Card’s serial number within the brackets.
Press the [
ENTER
] button to save and exit.