Diginet LEDsmart+ MultiMate MMTM/PB, Setup Manual

Page: 2 / 15

Push Button Minute Timer
2
Timer Setup
The LEDsmart
+
push button timer has a number of useful functions which can easily be set up by entering setup mode and
following the four easy steps.
The TIMEOUT PERIOD should always be set up. The other settings are optional, depending on the application. To set the
timeout period now, go to the next page.
Timer Setup Functions
Function See Part
Setting the Timeout period A
Setting Maximum Brightness B
Setting Advanced Timer Features C
Setting Off State LED Feature D
Converting from minute to hour
timer E
Setting MultiMate™ Mode F
Factory Defaults Reset G
A: Entering Setup Mode
If the timer has been powered up for LESS THAN 15 MINUTES see A1 .
If the timer has been powered up for MORE THAN 15 MINUTES see A2 .
Once in Setup Mode, options are selected by a series of ‘clicks’ of the push button. Each ‘click’ should be within 1 second
of the previous click.