Push Button Minute Timer
3
A1: Timer has been powered up via mains 240Vac for LESS THAN 15 MINUTES
Step 1
Press and hold the button for 10 seconds
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that
the timer is now in Setup Mode
Note: If more than one LEDsmart
+
minute timer is connected in parallel, all these
timers will now enter setup mode. The blink ON/OFF will also be seen on all
other LEDsmart
+
minute timers connected in parallel
Step 3
The timer is ready for the settings to be adjusted as required. Go to the relevant
setup function instructions
A2: Timer has been powered up via mains 240Vac for MORE THAN 15 MINUTES
Step 1
Press and hold the button for 30 seconds
Note: This resets the Setup Entry time back to 10 seconds (for the next 30
minutes)
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that
the timer is now in Setup Mode
Note: If more than one LEDsmart
+
minute timer is connected in parallel, all these
timers will now enter setup mode. The blink ON/OFF will also be seen on all
other LEDsmart
+
minute timers connected in parallel
Step 3
The timer is ready for the settings to be adjusted as required. Go to the relevant
setup function instructions
