Installation
17
Position the strike plate on the door frame centering
it with the center of the desired location of the door
mounting holes.
D
oor F
rame
Drill 0.25” (6.35mm) pilot holes using a 1/6” drill bit.
D
oor F
rame
Drill Pilot
Holes Here
Adjust the strike plate to the proper position (.125”
(3.18mm) from the door edge) then tighten the self
tapping screws.
D
oor F
rame
0.125 in
(3.18 mm)
Allow .125” (3.18mm) from door edge and mark the
position of the adjustment slot holes.
D
oor F
rame
0.125 in
(3.18 mm)
Mark Here
Position the strike plate and the self tapping screws into
the adjustment slot holes. Do not tighten the screws.
D
oor F
rame
Position and tighten the remaining self tapping screw
into the center hole.
D
oor F
rame
1
3
2
5
4
6
