Digiguard H.264 Digital video recorder -4/8/16 channel models, User Manual

Page: 37 / 68

4) Alarm
5) Motion
- Set alarm sensor connected to DVR.
- Set input type and dwell time for each channel.
- Select between N.O. and N.C.
(Normal Open : NO, Normal Close : N.C.)
- Click OK to save setting.
- Click DEFAULT to return to initial setting.
- Menu for DVR Motion Detection.
- Selection Channel
- SENSITIVITY : Sensitivity ‘Low ~Very High’.
- DWELL TIME : Time duration of motion detection.
- Click right button of mouse, motion cell area can set.
- Click OK to save setting.
- Click DEFAULT to return to initial setting.
-Cell Setup
Click left button of mouse to set Motion Mask Zone
by selecting or clearing blocks.
- Block Setup
Click selected cell and drag it to desired position.
And then “SELECT”,”CLEAR” buttons appear.
SELECT – Activates blocks to detect motion.
CLEAR – Deactivate blocks so that they will not
detect motion.
37