manualshive.com logo in svg

Digiguard H.264 Digital video recorder -4/8/16 channel models, User Manual, Page: 24 / 68

Share
Download
Digiguard H.264 Digital video recorder -4/8/16 channel models User Manual Download Page 24

4-6. Search

Searching is available in 3 different methods.

Click       button, and search window will popup as below:

1) Search by Date/Time & by Percentage of HDD

2) Search by Event List

- Search by Time and Date as entered. You can 

change the target Date/Time values by clicking “+”

and “-”.

- Search by Percentage of HDD

Search by Percentage of total recorded data on 

HDD. You can change the target Date/Time values 

by clicking “+” and “-” or anywhere in the percent 

search bar.

It starts playback from the selected Date/Time or 

from the point marked on the percent search bar

- Search by event list made in case of Motion, Alarm or 

Video Loss.

Select any event shown on the list first and click 

“PLAY” button to play it. And then it starts playback 

from the beginning of the selected event.

3) Search by BOOKMARK List

- Search by bookmark list.

While in playback mode, if you want to remember a 

certain point of the recorded data, press “BOOKMARK”
icon and the time and date will be added bookmark list.

Select any recorded data on the bookmark list and 
click “PLAY” button to play.

24

Summary of Contents for H.264 Digital video recorder -4/8/16 channel models





































































Reviews:

No comments