Digigram IQOYA CALL Series User Manual Download Page 9

Page: 9 / 77

IQOYA *CALL - IQOYA *CALL/LE

User Manual v0.99

Congratulations!

You have just acquired a Digigram IQOYA*CALL or IQOYA*CALL/LE.

IQOYA *CALL and IQOYA *CALL/LE are twochannel IP codecs dedicated to high quality outside broadcast audio

contributions.

Resulting from Digigram’s widely acknowledged expertise in audio quality, IQOYA *CALL

and IQOYA *CALL/LE are

built on a robust dedicated hardware platform (ARM technology) including FluidIP, the Digigram IP audio codec

engine you can trust.

Depending on your needs, there are several ways of configuring and controlling IQOYA *CALL or IQOYA

*CALL/LE.

The manual at hand will guide through installation, configuration, and operation. For any software related issue,

please refer to the specific documentation provided in its online help on each webpage.

9 / 77

Summary of Contents for IQOYA CALL Series














































































Search results

Summary of Contents for IQOYA CALL Series

Reviews:

Digigram IQOYA CALL Series, User Manual, Page: 9 / 77

Search results

Summary of Contents for IQOYA CALL Series

Reviews: