Page
6
P/N: RF160IRG Rev 1.0
E&OE
Copyright © 2021
Remove Mounting
Tab from underside
of cover
Push Mounting Tab into the
underside of base unit until
it locks into place.
Remove
Terminal
Cover
Remove screw
in base
Lift cover
once screw in
base has been
removed
A
B
C
RF160 Housing
The RF160 is housed in 3 piece plastic enclosure comprising a base plate , top cover and a terminal cover. The top
cover is fixed to the base using a Phillips head screw. The top cover needs to be removed to install the wire antenna.
The terminal cover is a press fit allowing easy removal. Once the wiring and programming has been completed the
cover should be reinstalled to help prevent the ingress of insects and other debris.
Wall Mounting
A wall mounting tab is located on the inside of the top cover should you wish to locate the unit on a wall or other
structure. Once removed from the cover the tab slides and locks into the base plate as shown below.
