manualshive.com logo in svg

DigiDesign Bomb Factory, Manual

Share
Download
DigiDesign Bomb Factory Manual Download Page 8

Bomb Factory Plug-ins Guide

2

Contents of the Boxed 
Version of Your Plug-in

Boxed versions of plug-ins contains the follow-
ing components:

• Installer  disc

• Activation Card with an Activation Code for 

authorizing plug-ins with an iLok USB Smart 
Key (not supplied)

Registering Your Plug-ins

If you purchased a download version of a plug-
in from the DigiStore (www.digidesign.com), 
you were automatically registered.

If you purchased a boxed version of a plug-in, 
you will be automatically registered when you 
authorize your plug-in (see “Authorizing Plug-
ins” on page 6).

Registered users receive periodic software update 
and upgrade notices. 

Please refer to the Digidesign website 
(www.digidesign.com) for information on tech-
nical support.

System Requirements and 
Compatibility

To use Bomb Factory plug-ins you need the fol-
lowing:

• An iLok USB Smart Key

• An iLok.com account for managing iLok li-

censes

• One of the following:

• A Digidesign-qualified Pro Tools system

• A Digidesign-qualified Pro Tools system 

and a third-party software application that 
supports the Digidesign TDM, RTAS

®

, or 

AudioSuite™ plug-in standard

• A qualified Avid

®

Xpress

®

, Avid Xpress DV 

or Avid DNA

™

 system

• A Digidesign-qualified VENUE system 

(TDM only)

• DVD drive for Installation disc (boxed version 

of plug-in only)

• Internet access for software activation and 

registration purposes

Digidesign can only assure compatibility and 
provide support for hardware and software it has 
tested and approved. 

For complete system requirements and a list of 
Digidesign-qualified computers, operating sys-
tems, hard drives, and third-party devices, refer 
to the latest information on the Digidesign web-
site:

www.digidesign.com/compatibility

Summary of Contents for Bomb Factory





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands