manualshive.com logo in svg

DigiDesign Bomb Factory, Manual

Share
Download
DigiDesign Bomb Factory Manual Download Page 11

Chapter 2: Installation

5

chapter 2

Installation

Installing Plug-ins for 
Pro Tools

Installers for your plug-ins can be downloaded 
from the DigiStore (www.digidesign.com) or can 
be found on the plug-in installer disc (included 
with boxed versions of plug-ins). 

An installer may also be available on the 
Pro Tools installer disc or on a software bundle 
installer disc.

Installation steps are essentially the same, re-
gardless of the package, system, or bundle.

Free Bomb Factory Plug-ins

The free Bomb Factory plug-ins are installed 
when you install Pro Tools. For more informa-
tion about installing Pro Tools, see the 

Setup 

Guide

 that came with your system.

Updating Older Plug-ins

Because the Bomb Factory Plug-in installers con-
tain the latest versions of Bomb Factory plug-
ins, use them to update any plug-ins you already 
own. 

Installation

To install a plug-in:

1  

Do one of the following:

• Download the installer for your computer 

platform from the Digidesign website 
(www.digidesign.com). After downloading, 
make sure the installer is uncompressed 
(.ZIP on Windows or .SIT on Mac).

– or –

• Insert the Installer disc into your computer. 

2  

Double-click the plug-in installer application.

3  

Follow the on-screen instructions to complete 

the installation.

4  

When installation is complete, click 

Finish

 

(Windows) or 

Quit

 (Mac).

When you open Pro Tools, you are prompted to 
authorize your new plug-in (see “Authorizing 
Plug-ins” on page 6).

Be sure to use the most recent versions of 
Bomb Factory plug-ins available from the 
Digidesign website (www.digidesign.com). 

Summary of Contents for Bomb Factory





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands