11
With the holes for
fi
xing the turnstile done, install the
fi
xing tie rods according to the
image below. Digicon recommends using a capsule chemical anchorage by Hilti
(
).
www.hilti.com.br
Step by step:
1. Using a 12mm drill, make a hole 90mm deep (tie rods M10).
2. Clean the hole with a blower or aspirator to remove the dust residue.
3. Place the tie rod inside the hole and measure the depth. The tie rod has a mark
that must remain parallel to the ground.
4. Place the
capsule inside the hole.
HVU
