4.1
Pocket AL I/O
Management through ring
4. MANAGEMENT THROUGH RING
Pocket AL I/O can be set to perform some actions when it receives a phone ring. This operating mode, if compared with the SMS
one, is free of charge as Pocket AL I/O will manage the action associated to the phone ring without answering the call.
When setting the device it will be important to define which action to perform at the ring reception.
Here below a table with the commands syntax, the users list where the phone number authorized to interact with Pocket AL I/O
must be present and the command description:
Command syntax
User List
Description
#CALL#CONFIG#
#ACCLIST#
When the ring is received, the device will send the SMS containing
the device current configuration.
#CALL#GSM#
#ACCLIST#
When the ring is received, the device will send the SMS containing
the information of the GSM network.
#CALL#TEST#
#ACCLIST#
When the ring is received, the device will send the SMS containing
the current situation.
#CALL#TESTn#
#ACCLIST#
When the ring is received, the device will send the SMS containing
the current situation of the specified input.
#CALL#ID uscita#
#5,6,7,8,11,12#
When the ring is received, the device will modify the output status
sending the notification SMS.
#CALL#ID uscita,N#
#5,6,7,8,11,12#
When the ring is received, the device will modify the output status
without sending the notification SMS.
#CALL#ID uscita x#
#5,6,7,8,11,12#
When the ring is received, the device will modify the output status for
x seconds sending the notification SMS.
#CALL#ID uscita x,N#
#5,6,7,8,11,12#
When the ring is received, the device will modify the output status for
x seconds without sending the notification SMS.
#CALL#STANDBY#
#STANDBY#
When the ring is received, the device will enable/disable the device.
The enabling of Pocket AL I/O will be confirmed with a phone ring
while no action is performed for the disabling.
#CALL#STANDBY,N#
#STANDBY#
When the ring is received, the device will enable/disable the device
without any notification.
