5.4
PALLADIO ISDN
Driver Installation (Windows® ME)
5.3.
64/128KBIT/S INTERNET CONNECTION (WINDOWS® ME)
To carry out Internet connections, it is necessary to use Windows® Dial-up
and select Digicom Palladio ISDN driver previously installed.
Run Control Panel/Network and Dial-up connections, select Create a
New Connection.
In the first window insert the
connection name (eg. Internet)
and select the driver previously
installed.
In the second window insert the
telephone number of your
Internet Provider.
Complete the Internet
Connection with Finish.
For 128 Kbit/s Internet
connections it is necessary to select the MLPPP protocol (128K) and to insert
the Provider ’s telephone number twice with an asterisk. (eg.
0123456789*0123456789).
The following table shows the connection speed depending on the installed
driver and on the telephone number inserted:
Config.
Driver
Telephone number format
Speed
1
Digicom Palladio ISDN Internet 64K
0123456789
64000 bit/s
2
Digicom Palladio ISDN Internet 128K
0123456789
64000 bit/s
3
Digicom Palladio ISDN Internet 128K
0123456789*0123456789
128000 bit/s
PLEASE NOTE: not all Internet accounts do support 128Kbit/s connections. Check with
your Provider if this service is available.
After the connection, carry out a Download and check that the speed is greater of
80Kbit/s.
If your Internet account does not support 128Kbit/s connections, you have to use
the 1st or the 2nd configuration in the table.
Using the 3th configuration, you will pay twice for two 64Kbit/s connections.
Check further Internet configurations with your Provider.
Click Finish.
Summary of Contents for PALLADIO ISDN
