Digicom PALLADIO ISDN, User Manual

Page: 50 / 65

7.12
PALLADIO ISDN AT Command Set
!N3= Store Subaddress number
This command enable to store the Subbaddres field for the Subaddress
function.
!N3=”ssss” where “ssss” is the Subaddress field with a maximum of 4
alphanumeric characters (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D,
*, #).
!N3? show the stored Subaddres field
To enable the Subaddress function, please also make reference to the AT*S
command.
Store: yes Default= n/a
!N5 Call-Back Password
This command is used to load the Call-back password in the Originate and
Answer devices (see also AT*E)
!N5="xxxxxxxx"
where x are up to 8 alpha numeric characters.
Default=n/a
!N6 Call-back Phone number
This command is used to load the Call-back Phone number in the Originate
device (see also AT*E)
!N6="xxxxxxxx"
where x are up to 35 numeric characters.
Default=n/a
!N7 Short Message Transfer
This command is used to load a Short Message (up to 130 characters) to
send using the Short Message Transfer feature (see also AT*E)
!N5="xxxxxxxx"
where x are up to 130 alpha numeric carachters