manualshive.com logo in svg

digico S21, Getting Started

Share
Download
digico S21 Getting Started Download Page 8

DiGiCo S21

1-4

1.2.4 The Selected Channel ............................................................

One of the channels in the Channel view is displayed with a highlighted background, indicating that it is currently the Selected Channel. 
This means that it has been assigned to the worksurface controls to the right of the screen as shown in the image below. To assign a 
channel, touch in the Output Block at the bottom of the on screen Channel view

NOTE: All of the master and under screen rotaries are encoders and switches in one unit.
Often, different functions can be accessed by a standard turn, a push turn and a push (switch)
eg Standard turn = Gain control & Push turn = Trim control

Assignable Encoder/Switches

Selected Channel

Compressor Threshold

Gain & Trim (Push Turn)

HPF

Gate Threshold
Aux Pan (Stereo)

Aux Level

Output Block area

Touch here to select a channel

NOTE: When the right hand screen is not displaying the Channel view (eg it is displaying an EQ view), the master 
screen worksurface rotaries will not be assigned to the Channel view controls but to the controls for the EQ or other 
expanded view instead.

1.2.5 The Under Screen Controls ...................................................

Selected Channel

Blue = Pan - Default assignment

Touch and Hold in this row

Assigns Gain/Trim and highlights in Red

Touch and Hold in this row

Assigns HPF Freq

 

and highlights in Mauve

 and On/Off

Touch and Hold in this row

Assigns Dynamics 1 Threshold and On/Off 

and highlights in Green

Touch and Hold any AUX row

Assigns Aux Send & On/Off

Touch and Hold in this row

Assigns Dynamics 2 Threshold 

 

and highlights in Yellow

and On/Off

Touch the selected channel

 in this row to return to 

default Pan assignment

There is a row of 10 encoder/switches immediately below each touchscreen (shown above) that refer to the channels with which they 
are aligned. 

Summary of Contents for S21




























Reviews:

No comments

Brands by name

Popular brands

Load more brands