digico S21 Getting Started Download Page 3

3

DiGiCo S21

Copyright © 2015  Digico UK Ltd

All rights reserved. 

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in 
any form by any means without the written permission of Digico UK Ltd.  Information in this manual is subject to change without notice, 
and does not represent a commitment on the part of the vendor.  Digico UK Ltd shall not be liable for any loss or damage whatsoever 
arising from the use of information or any error contained in this manual.

Software License Notice

Your license agreement with Digico UK Ltd, which is included with the S21 console product, specifies the permitted and prohibited uses 

of the product. Any unauthorised duplication or use of Digico UK Ltd software, in whole or in part, in print or in any other storage and 
retrieval system is prohibited.

Licenses and Trademarks

The S21 logo and S21 name are trademarks. Digico UK Ltd and the Digico UK Ltd logo are registered trademarks of Digico UK Ltd. 

Digico (UK) Ltd
Unit 10
Silverglade Business Park
Leatherhead Road
Chessington
Surrey
KT9 2QL
England
Telephone: 

+44 (0)1372 845600

Fax:  

 

+44 (0)1372 845656

Email: 

 

[email protected]

WWW: 

 

http://www.digico.biz

Manual Issue and Date: Issue B - September 2015 - For Version 1.0 

Software Licence Agreement

"

Product

": 

S-Series software product produced by Digico UK Ltd  intended for use on Target Platform identified below.

"

Target Platform

":  Digico S-Series Digital Console systems.

 

In return for the payment of the one-time fee, the Customer (identified at the end of this Agreement) receives from Digico UK Ltd a 

licence to use the Product subject to the following terms and conditions.

1.  The Product may be used without time limit by the Customer on the Target Platform.
2.  The Customer must register the Product with Digico UK Ltd. Registering the Product is deemed an acceptance of the terms and 

conditions in this agreement.

3.  The Product and its licence are not transferable, and the Customer is not permitted to onward-license to any third party.  The Cus-

tomer indemnifies Digico UK Ltd against any and all claims and actions arising from third party use of copies of the Product made by 

the Customer.

4.  The Customer agrees not to attempt to decompile the object code of the Product otherwise than in circumstances specifically pro

-

vided for by law, and then only after consultation with Digico UK Ltd.

5.  The Customer agrees not to use, or licence the Product for use, with equipment other than the Target Platform.
6.  The Customer agrees not to modify the Product without the prior written consent of Digico UK Ltd.
7.  This Agreement applies to any enhancement or upgrades that may become available for the Product.

8.  This Agreement does not transfer any right, title, or interest in the Product to Customer except as specifically set forth herein.

9.  Digico UK Ltd reserves the right to terminate this Agreement upon breach, in which event Customer shall thereafter only be author-

ised to use the Product to the extent that its contractual commitments to third parties require and then only where such commit-
ments relate to use of the Product as authorised in the foregoing provisions of the Agreement.

LIMITED WARRANTY

 - Digico UK Ltd warrants for a period of 1 year from the date of purchase of the Product, the Product will reason-

ably execute its programming instructions when properly installed on the Target Platform.  In the event that this Product fails to execute 
its programming instructions during the warranty period, the Customer's remedy shall be to return the Product to Digico UK Ltd for 
replacement or repair at Digico UK Ltd option.  Digico UK Ltd makes no other express warranty, whether written or oral with respect of 
this Product.

LIMITATION OF LIABILITY

 - Except as otherwise expressly provided by law, (a) the remedies provided above are the Customer's sole 

and exclusive remedies and (b) Digico UK Ltd shall not be liable for any direct, indirect, special, incidental, or consequential damages 

(including lost profit whether based on warranty, contract, tort, or any other legal theory.)

This agreement is made under the Laws of England.

LICENCE NO: ...................................................................................

REGISTRATION DATE: ....................................................................

Summary of Contents for S21




























Reviews: