Digicam Premium DPI series User Manual Download Page 69

Page: 69 / 158

User Manual of Network Video Recorder

Choose a log with record file and click

button to enter Playback interface.

If there is no record file at the time point of the log, the message box “No result found” will pop up.

Figure 5. 17

Result of System Log Search

Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Figure 5. 18

Interface of Playback by Log

5.1.6

Playing Back External File

Purpose:

Perform the following steps to look up and play back files in the external devices.

Steps:

Enter Tag Search interface.

Menu>Playback

Select the

External File

in the drop-down list on the top-left side.

The files are listed in the right-side list.

Summary of Contents for DPI series































































































































































Search results

Summary of Contents for DPI series

Reviews:

Brands by name

Popular brands

Digicam Premium DPI series, User Manual

Search results

Summary of Contents for DPI series

Reviews:

Brands by name

Popular brands