Regulatory information
CE mark (Europe)
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
251
Detachable Antenna
Under Industry Canada regulations, this radio transmitter may operate using only an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that necessary for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvépour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillageradioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne etson gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire àl'établissement d'une communication
satisfaisante.
CE mark (Europe)
The XBee is certified for use in several European countries. For information, visit
www.digi.com/resources/certifications
If the XBee is incorporated into a product, the manufacturer must ensure compliance of the final
product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment Directive). A Declaration of
Conformity must be issued for each of these standards and kept on file as described in the RE
Directive (Radio Equipment Directive).
Furthermore, the manufacturer must maintain a copy of the XBee user manual documentation and
ensure the final product does not exceed the specified power ratings, antenna specifications, and/or
installation requirements as specified in the user manual. If any of these specifications are exceeded
in the final product, a submission must be made to a notified body for compliance testing to all
required standards.
OEM labeling requirements
The CE marking must be affixed to a visible location on the OEM product.
CE labeling requirements
The CE mark shall consist of the initials “CE” taking the following form:
