Setting up the Digi XBee 865/868LP Development Kit
Digi XBee 865/868 LP Development Kit Getting Started Guide
6
Assembling Digi XBee 856/868LP Development Kit
To assemble your Development Kit, perform the following steps:
1. Install the modules on the XBee Interface Boards (XBIB) by lining the pins up with the headers
and pressing the module into place.
2. Attach the dipole antennas to the modules.
3. Connect the first XBIB to your computer using a USB cable. This first device is designated as
your base radio.
4. Connect the remaining modules and interface boards, and set them aside for now.
.
You are now ready to run the XCTU software and to begin configuring your XBee Mesh Network.