Digi XBee 865/868 LP Development Kit Getting Started Guide
14
Configuring Digi XBee Radios Using
XCTU
You can configure the XBee modules over-the-air using XCTU. To use this feature, the base device
must be configured for API mode. The following sections provide instructions for configuring
your remote XBee modules using XCTU.
Configuring the Remote XBee Modules Using XCTU
To configure the remote XBee modules using XCTU, follow these instructions:
1. On your base radio, go to the
Modem Configuration
tab in XCTU.
2. Click
Read
and the parameter types appear in the window.
3. Set the base radio AP to 1:" Then in bullets beneath:
