Configuring Digi XBee Radios Using XCTU
Digi XBee 865/868 LP Development Kit Getting Started Guide
16
Changing the XBee Firmware Versions using XCTU
These modules can be configured for an RF data rate of 80 Kbps or 10 Kbps with a simple
firmware change. You can send information at a lower data rate to improve your receiver
sensitivity which increases range.
1. Click the
Modem Configuration
tab in XCTU.
2. Select the modem type from the Modem drop-down menu that corresponds with the RF data
rate desired: XB8-DM for the 80 Kbps version or XB8-DP for the 10 Kbps version. The function
set auto-populates with the version associated with the selected modem type.
CAUTION!
DigiMesh is not available at the 10K data rate.
