Digi Digi TransPort WR Installation Manual Download Page 16 | Manualshive

Page: 16 / 17

background image

Transport WR Series Installation Guide

15

3 General Specifications

Model numbers

Transport WR41-E, H, U, C

Power supply

5V DC / 3A

Dimensions / Weight

W6.77 x D14.33 x H1.26 inches, 1.17 lbs

Operating temp. range

-4 to +122 degrees Fahrenheit, -20 to +50 degree Celsius

WR41-E

GSM/GPRS/EDGE
modem

Quad-band GSM 850/900/1800/1900 MHz EDGE (E-
GPRS) multi-slot class 10 (max 236.8 kbps downlink),
mobile station class B, modulation and coding scheme
MCS1-9

GPRS multi-slot class 10, mobile station class B, PBCCH
support, coding schemes CS 1-4

WR41-H

GSM/GPRS/EDGE/
UMTS/HSDPA modem

HSDPA 1.8 Categories 1-4, 11 and 12

HSDPA 3.6 Categories 5 and 6

UMTS: 384 Kbps downlink, 384 Kbps uplink

MO 0201: 850/1900/2100 (Rx diversity) MHz

Quad-band GSM 850/900/1800/1900 MHz EDGE (E-
GPRS) multi-slot class 12 (max 236.8 kbps downlink),
mobile station class B, modulation and coding scheme
MCS1-9

GPRS multi-slot class 12, mobile station class B, PBCCH
support, coding schemes CS 1-4

WR41-U

GSM/GPRS/EDGE/
UMTS/HSDPA/HSUPA
modem

HSUPA mode: 2 Mbps Category 5

HSDPA 1.8: Categories 1-4, 11 and 12

HSDPA 3.6: Categories 5 and 6

HSDPA 7.2: Categories 7 and 8

UMTS: 384 Kbps downlink, 384 Kbps uplink

MO 0301: 850/1900/2100 (Rx diversity) MHz
MO 0302: 850 (Rx Diversity) / 1900 (Rx Diversity) / 2100 MHz
Equalization and Rx Diversity at the same time Quad-band
GSM 850/900/1800/1900 MHz EDGE (E-GPRS) multi-slot
class 12 (max 236.8 kbps downlink), mobile station class B,
modulation and coding scheme MCS1-9

GPRS multi-slot class 12, mobile station class B, PBCCH
support, coding schemes CS 1-4

«
...
14
15
16
17
»

Summary of Contents for Digi TransPort WR


















Reviews:

No comments

Related manuals for Digi TransPort WR

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 2

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 28

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 2

Brand: Patton electronics Pages: 8

Brand: Keithley Pages: 59

Brand: Observint Pages: 117

Brand: Sangamo Pages: 2

Brand: EnGenius Pages: 3

Brand: Speedtouch Pages: 124

NetIron MLXe Series

Brand: Brocade Communications Systems Pages: 305

Brand: ADTRAN Pages: 2

Brand: Paradyne Pages: 6

Comet 3356P-LAN

Brand: ZyXEL Communications Pages: 38

Brand: Hi-flying Pages: 59

Brand: Vista Pages: 93

Brand: H3C Pages: 51

Brand: NETGEAR Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands