DC-190 RS-232 specification (continued)
(C) DATA
Code: Parts code is only
when a
Code is called during the counting mode.
The maximum is
If the
code is less than 16
then the
rest of the data wilt be filled
space
Ex. Parts code
12
DATA
1 2 SP
SP SP SP SP S P SP SP SP CR
Set
: Set Point data is
sent when a
Code is
during
There are 6 set point data to be sent : Set Point 1
or
Set Point 2
Set Point
Set Point 4(b), Set Point 5( c) and Set
6 (d).
Set Point 1
Weight : Variable length, Max 5 digits and 1 decimal point.
or (G) Quantity : Variable
Max 6 digits.
(Note :
one of
(set 1
or
(set 1 quantity) is sent.)
Set Point
a, b,
d)
Percentage : Variable length, Max 5 digits and 1 decimal
or Lower Weight : Variable length, Max 5 digits and 1 decimal point.
or Lower Quantity :
length, Max 7 digits.
4
set point 1 and set point 2 can be sent as
SET 1 SET
* Quantity & Percentage
*
* Weight & Percentage
Upper Weight & Lower
Please Note: Set Point 2 to 6 must either increase or decrease
The decimal point for weight must be correct.
Gross
: Variable
Max 5 digits and 1
point.
Net Weight :
length, Max 5 digits and 1 decimal point.
Unit Weight : Variable length, Max 5 digits and 1 decimal point.
Tare Weight : Variable length, Max 5 digits and 1 decimal point.
Quantity :
tength, Max 7 digits.
Total Quantity : Variable tength, Max 7
sent when PRINT key
depressed.
Note ; Only one of
(Quantity) or
(Total Quantity) is sent at a time.
45
All manuals and user guides at all-guides.com
Summary of Contents for DC-190 ULTRA COUNT
