Digi 70002405 User Manual Download

Page: 120 / 163

Configure the device using the ConnectPort LTS web interface

Administration

Digi ConnectPort LTS User Guide

120

Administration

You can periodically perform administration tasks on ConnectPort LTS products, such as:

File management

Changing the password used for logging onto the device

Backing up and restoring device configurations

Updating firmware and Boot/POST code

Restoring the device configuration to factory defaults

Rebooting the device

The Administration section in the

web interface

provides the following options:

File Management

: Upload and manage files, such as custom web pages, applet files, and

initialization files. See

File Management

for more information.

Python Program File Management

: Upload custom programs in the Python programming

language to Digi devices and configuring the programs to execute automatically at startup. See

Python Configuration

for more information.

Backup/Restore

: Back up or restore device configuration settings. See

Backup/Restore

for

more information.

Update Firmware:

Update the firmware, including Boot and POST code. See

Update the

firmware and boot/POST code

for more information.

Factory Default Settings

: Restore a device to factory default settings. See

Factory default

settings

for more information.

System Information

: Display general system information for the device and device statistics.

See

System information

for more information.

Reboot

: Reboot the device. See

Reboot

for more information.

These administrative tasks are organized elsewhere in the web interface:

Enable and disable network services. See

Reboot

for more information.

Enable password authentication for the ConnectPort LTS device. See

Users

for more

information.

Certificate Management

Use the Certificate Management page to upload your certificates and private key to the Digi device
server.

CAUTION!

You must restart the web server for changes to take effect. To restart the

web server, click

Restart Web Server

You can also generate a temporary self-signed certificate for testing purposes. To generate a
temporary certificate, click

Generate

Summary of Contents for 70002405




































































































































































Search results

Summary of Contents for 70002405

Reviews:

Related manuals for 70002405

Brands by name

Popular brands

Digi 70002405, User Manual

Search results

Summary of Contents for 70002405

Reviews:

Related manuals for 70002405

Brands by name

Popular brands