Configure the device using the ConnectPort LTS web interface
Sign in to the web interface
Digi ConnectPort LTS User Guide
38
Sign in to the web interface
After you successfully assign an IP address to your device, you can sign in to the device's web interface
using either of the following:
n
n
Use a web browser to sign in to the web interface
To access the web interface for a Digi device using a browser:
1. Open a web browser and type the current IP address of the ConnectPort LTS device in the
address bar. A login dialog displays.
2. Enter the default user name and password for the device.
n
User name
: The default user name is
root
.
n
Password
: The unique default password is printed on the device label. If the password is
not on the device label, the default password is
dbps
. If neither of the defaults work,
the password may have been updated. Contact your system administrator.
Note
If this is the first time you have logged into the web interface, you are required to change
the password.
3. The
Home
page appears. See
for an overview of the Home page and other linked
pages.
Note
If password authentication is enabled, the idle timeout automatically logs users out of
the web interface after 5 minutes of inactivity.
Use Digi Device Discovery utility to sign in to the web interface
To discover the Digi device and open the web interface:
1. Go to the
support page.
2. Under
Product Support
, click the
Utilities
tab.
3. Under
Operating System Specific Utilities
, choose an operating system.
4. Under
Utilities
or
Operating System Specific Diagnostics, Utilities and MIBs
, select either
Device Discovery Utility for Windows - Standalone version
or
Device Discovery Utility for
Windows - Installable version
.
The standalone version runs the utility immediately after the download is complete. The
installable version installs the utility on your computer and adds it to a program group in the
Start
menu named
Digi
>
Digi Device Discovery
.
