INSTRUCTION MANUAL
STOPWATCH DTM100
FEATURES:
CHRONOGRAPH
- Display of Lap, split and running
chronograph.
- Measure up to 9 hours 59 minutes
and 59.99 seconds.
-
100
recallable
lap
and
split
memories.
- Display of fastest (FS), slowest (SL)
and average (AV) lap times for the
laps traversed
- Lap counter (00-99)
TIMER:
- Countdown timer, maximum 10hours.
-
Automatically
recycles
upon
completion of countdown. And cycle
counter to keep track of cycles counted.
- 30 seconds shuttle-countdown for
timeout period timekeeping.
PACER:
- From 10 beeps/minute to 320
beeps/minute.
- Display of pacer frequency, beep
counter
and
total
time
elapsed
simultaneously.
CLOCK
:
- Hour, minutes, seconds, month, date,
day
and
year,
auto
calendar.
-
Alarm
hour
and
minutes.
- 12/24 hour and European calendar
user option.
ALARM MODE AND TIME
1 . Press D to acess the TIME MODE.
2. On the upper line, it is the alarm
clock. To set the alarm, press B to select
the numbers and A to change them.
3. The alarm can also be activated or
deactivated by pressing C in the TIME
MODE. When the alarm is on “AL” is
blinking. The alarm will display 3 short
beeps/sec during 15 sec.
Remark:
The alarm is automatically on
if the hours or minutes have been
modificated.
If the alarm beeps while you are using
another mode, the alarm will ring with
only
3
short
beeps.
4. On the lower line, the time is display.
Press A to choose between 12h or 24h.
5. Press B to set the hours, minutes,
seconds and on A to adjust them.
6. Press D to
end the setting.
CHRONOGRAPH OPERATION:
1.
Depress D to select the operating
mode. The chrono indicator is shown.
2.
Depress A to start.
3.
Depress B to read the 1st lap time.
LAP is shown at the upper row, SPLIT is
shown at the middle row and the
RUNNING CHRONO is shown at the
bottom row.
4.
Depress B to display the 2nd lap
time. The 2 digit in dot matrix format at the
top left corner is the lap counter.
5.
Depress B to display the 3rd lap
time.
6.
Depress A to stop counting.
RECALL MODE
1.
Depress C to recall 1st lap data
(memory can be recalled anytime
when the chronograph is either
running or stopped).
2.
Depress C again to recall the 2nd
lap data.
3.
Depress C again to recall the 3rd
lap data.
4.
Depress C again to recall the
stopped time.
5.
At any time during the RECALL
mode....
6.
Depress A will display the average
(AV) Lap time of the Laps traversed.
7.
Depress B will display the slowest
(SL) Lap time of the laps traversed.
8.
Depress B again will display the
fastest (FS) Lap time of the laps
traversed.
9.
Repeated depression of B will
display the fastest and slowest Lap times
alternately.
Remarks:
(1)
if lap counter is > 99 or
either Lap or split is greater than 9 hours
59 min 59.99 sec, the power of the
computer has been exceeded and the AV
information will be disabled as shown.
(2)
If either lap of split is greater than 9
hours 59 min 59.99 sec, the power of the
computer has been exceeded and the SL
and FS information will be disabled.
10.
Another depression of the C button will
return the chrono to the stopped status.
(Depression of D at any time during recall
mode serves the same purpose.)
11.
Depress A to restart counting or B
to reset all memories.
Remark:
Since there are only 60
memories the chronograph will recall only
the 1st 59 and the last lap data.
TIMER MODE
12.
Depress D to select the TIMER
mode.
13.
Depress B to select digits and A
to set digit. Digits will be advanced by
+1 for every depression of A.
14.
When the seconds digits are set,
depress B to complete the setting
process. The upper and middle row
will show the same preset time. The 4
digit counter at the lower row will
remain at 0000
15.
Depress A to start countdown.
The timer can be started or stopped by
depressing
A.
When
the
timer
approaches zero, an output of 2 short
beeps/seconds will sound for 15
seconds. (push of B, C or D buttons
will stop the sound) The counter will
advance by 1 and timer starts again
immediately.
16.
When the timer is at the stopped
condition, depress C will immediately
start a 30 seconds shuttle countdown
(for timeout timekeeping), which is
displayed at the top row. At the end of
the 30 seconds a beep will be
generated and the displays will return
to the original status.
17.
Depress C while this countdown
is in progress will terminate it
immediately and the display return to
its original status.
18.
Countdown will resume when A
is depressed.
Remarks: (1)
if the preset time is 29
seconds, only 2 beeps will sound on
approach of zero.
(2)
When timer
reaches zero when the stopwatch is in
other modes, only 2 beeps will sound.
If the game has a 20 minutes period,
select the timer mode and set the
countdown time to 20 minutes.
