<Creating areas for motion detection>
Select desired areas (highlighted in
green
when selected) for motion detection. To select an area, drag
the mouse while you highlight the desired area.
Options are available as below:
Mark mode
: Set the selection (mouse pointer) available for marking the area.
Erase mode
: Set the selection (mouse pointer) available for deselecting the area.
Mark All
: Select the entire area on the screen.
Clear All
: Cancel the selection.
Copy to Channel
: Copy the selected areas to other camera channels.
Save And EXIT
: Save the selected areas and return to the previous setup screen.
Cancel And EXIT
: Cancel the selection and return to the previous setup screen.
<< To apply the same values to all settings, move to the
All
row and repeat steps 2) ~ 4). Creating areas
for the
MOTION AREA
column is done individually.
- SENSOR
1) Check a box in the
No
column for activating each camera.
Move to the
CAMERA
column and select which camera and PTZ preset to use.
Move to the
TYPE
column and select a sensor type.
Move to the
ALARM
column and select alarm channels to activate.
Move to the
REC.TIME
column and select for how long the sensor input continues.
Move to
DI Method
and select a DI type.
Select the
Save (
)
button and confirm to save the changes.
25
Summary of Contents for DIS-4000
