Sensor (D/I)
There are two sensor interface types – Voltage Type and Relay Type. The interface type can be
controlled by the software. Before connecting sensors, check driving voltage and output signal type of
the sensor. Since the connection is different according to sensor type, be careful to connect the sensor.
Signal
Description
COM
Connect (-) cable of electronic power source for sensors to this port as shown
in the circuit above.
DI1~DI16
Connect output of sensors for each port as shown in the circuit above.
Note
i
Input range: TTL level 4.5V threshold, Max 500mA
18
+5V
+5V
DI 1
DI 16
COM
---
---
---
-
DI 1
DI 16
COM
----
---
---
+
-
Relay Type
Voltage Type
+5VDC~+24VDC
+
-
+
-
Output of
Sensor 1
Output of
Sensor 16
Output of
Sensor 16
Output of
Sensor 1
Internal
Internal
+
+
-
-
Summary of Contents for DIS-4000
