34
User_Manual_RP3001k.doc
HOMEPAGE=url
Sets the default home page (visited when the user selects "Browse the Internet") to url.
LOGLEVEL=[0 or 1]
Enables (1) or disables (0) playback logging (for media play audit purposes).
PAUSE=[pause time in seconds]
Sets the default pause time between slides.
PLAYWAVES=[0 or 1]
Enables (1) or disables (0) playback of wave audio files associated with JPEG images. Default is 1.
ROTATE=[0, 90, 180 or 270]
Sets the default rotation angle for JPEG images.
SHUFFLE=[0 or 1]
Enables (1) or disables (0) shuffled playback mode.
SIZEMODE=[fit, center or stretch]
Sets the default scaling mode for JPEG images.
SLIDESHOW=url
Sets the default slideshow. This can either be a URL to a scriptfile on a remote server (e.g.
http://www.myserver.com/script.txt), or a local filename (e.g. /digiframe/script.txt). Note that the
/digiframe prefix must be supplied for scripts residing on the DF-1710’s local hard disk. Using dfos.ini to set
the default slideshow to a script file on a remote server is a more robust way of implementing “pull” mode
remote control of slideshows than the alternate method of referencing a remote nested script in a local
script, especially in slow network situations.
SMBNAME=computer-name
Assigns the network name computer-name to the DF-1710. This is the name that will appear in Network
Neighborhood. Effective only when SMB networking is enabled. The default name of the Digi-Frame is DF-
xxyyzz, where xx, yy, zz are the last three bytes of the frame's MAC address (in hexadecimal).
SMBNETWORK=[0 or 1]
Enables (1) or disables (0) SMB network sharing. Default is ENABLED.
