21
10 TROUBLESHOOTING
SLASHER
TROUBLE
POSSIBLE CAUSE
REMEDY
Cutting Blades Stalling
Debris around the blades
Remove Debris/Ensure that safety wire is not broken causing blade
entanglement.
Going to fast through thick/long material
Adjust Travelling/RPM Speed OR make smaller passes.
Cutting Blade Blunt
Check, sharpen or replace as required.
Cutting Blades Bent/Damaged
Check and Replace.
Loss of Hydraulic oil
Motor Output Seal
Inspect for any hydraulic oil leaks, repair as necessary, replenish
lost oil.
Loose hydraulic connections on motor
Loss of Gearbox oil
(Only SL-000225 and SL-000227
Slasher models)
Debris have damaged the gearbox output shaft
seal OR a faulty or worn hydraulic motor output
shaft seal can cause hydraulic oil to contaminate,
flood the gearbox oil and in some instances may
cause the gearbox output shaft seal to dislodge.
Inspect for any signs of gearbox oil leaks, repair as necessary,
replenish lost oil.
Loss of Hydraulic oil
A faulty or worn hydraulic motor output shaft seal
can cause hydraulic oil to contaminate, flood the
gearbox oil and in some instances may cause the
gearbox output shaft seal to dislodge.
Replace hydraulic motor output shaft seal. Drain contaminated
gearbox oil. Replace new gearbox oil into gearbox.