Profila Operator’s Manual Troubleshooting
24
Excessive oil
temperature
Hydraulic oil level too low.
Refer to skid-steer's
owners manual
Obstruction in hydraulic lines
Remove obstruction and
replace if necessary
Hydraulic oil or oil filter in skid-steer is
dirty
Refer to skid-steer's
owners manual
Relief valve setting adjusted too low
Refer to skid-steer's
owners manual
Couplers not engaged
Engage couplers
A Hydraulic
cylinder not
operating
Insufficient hydraulic flow from the skid-
steer
Refer to skid-steer's
owners manual
Cylinder rod bent
Visually inspect the
cylinder for damage
Cylinder seals damaged
Replace cylinder seals
Obstruction in hydraulic lines
Remove obstruction and
replace if necessary
Hydraulic cylinders
only operating in
one direction
Contaminants in the hydraulic system
and solenoid valve
Remove spool from
solenoid valve and check
for foreign material. Clean
or replace. Also check
seals for damage. Replace
if necessary
Damaged electrical wiring.
Test and replace if
necessary.
Solenoid valve spool bent
Replace spool
Nut on Solenoid valve too tight
Loosen nut
All hydraulic
cylinders not
functioning
Blown fuse on skid-steer
Refer to skid-steer's
owners manual
Damaged electrical wiring
Test and replace if
necessary
Solenoid valve spool bent
Replace spool
Nut on Solenoid valve too tight
Loosen nut
