Digga PDD-PD50, Service & Repair Manual

Page: 44 / 69

44
PM-000100-D PDD - PD50 Service and Repair Manual - October 2017
CHANGING THE OIL
1. Lay the drive unit flat on the
ground with the oil fill bung
facing up. Using an 8mm Allen
key remove the bung
2. Rotate the unit until the oil
fill hole is sitting at the bottom
and drain all the oil.
NOTE: If your unit is leaking oil after you
have performed the daily checks consult
your local authorised service agent
PREMIUM DRIVE UNIT RANGE (PDD-PD50 DRIVE UNITS)
Use quality extreme pressure gear oil
(EPG ISO 320 GRADE - MINERAL OIL)
NOTE
3. Rotate the unit until the oil
fill hole is sitting between
60º - 70º from horizontal.
Add oil until it reaches the fill
hole. Never completely fill the
gearbox with oil. Ensure the
drive is tilted 60º when filling.
60º