Digga Magnum II Series, Operator And Parts Manual

Page: 5 / 56

5
GENERAL COMMENTS
PREFACE
Congratulations on the purchase of your new DIGGA product! This product was carefully designed and
manufactured to give you many years of dependable service. Only minor maintenance, such as
cleaning and lubricating, is required to keep it in top working condition. Be sure to observe all
maintenance procedures and safety precautions in this manual and on any safety decals located on
the product and on any equipment on which the attachment is mounted. This manual has been
designed to help you do a better, safer job. Read this manual carefully and become familiar with its
contents.
WARNING! NEVER LET ANYONE OPERATE THIS UNIT WITHOUT READING THE "SAFETY
PRECAUTIONS" AND "OPERATING INSTRUCTIONS" SECTIONS OF THIS
MANUAL. ALWAYS CHOOSE HARD, LEVEL GROUND TO PARK THE VEHICLE ON
AND SET THE BRAKE SO THE UNIT CANNOT ROLL.
Unless noted otherwise, right and left sides are determined from the operator’s control position when
facing the attachment.
NOTE: The illustrations and data used in this manual were current according to the information available
to us at the time of printing, however, we reserve the right to redesign and change the attachment as
may be necessary without notification.
BEFORE OPERATION
Perform a “Hazard Assessment” of the job site and remove any possible hazards. The primary
responsibility for safety with this equipment falls to the operator. Make sure the equipment is operated
only by trained individuals that have read and understand this manual. If there is any portion of this
manual or function you do not understand, contact your local authorized dealer or the manufacturer to
obtain further assistance. Keep this manual available for reference. Provide the manual to any new
owners and/or operators.
SAFETY ALERT SYMBOL
This is the “Safety Alert Symbol” used by this industry. This symbol is used to warn of
possible injury. Be sure to read all warnings carefully. They are included for your safety
and for the safety of others working with you.
SERVICE
Use only manufacturer replacement parts. Substitute parts may not meet the required standards.
Record the model and serial number of your unit on the cover of this manual. The parts department
needs this information to insure that you receive the correct parts.
SOUND AND VIBRATION
Sound pressure levels and vibration data for this attachment are influenced by many different
parameters: some items are listed below (not inclusive):
• prime mover type, age, condition, with or without cab enclosure andconfiguration
• operator training, behavior, stress level
• job site organization, working material condition,environment
Based on the uncertainty of the prime mover, operator, and job site, it is not possible to get precise
machine and operator sound pressure levels or vibration levels for this attachment.
PM-000102-A OCTOBER 2017 3