17
PUSH OVER BAR
CYLINDER
RIGHT COMPARTMENT
COVER
PRESSURE GAUGE
LEFT COMPARTMENT
COVER
EXCAVATOR
MOUNTING PLATE
SKID
SHOE
ROTOR
DEFLECTOR
DOOR
SKID
SHOE
MAINFRAME
SKID SHOE LOWER BEARING
ASSEMBLY
ROTOR
SKID
SHOE
MAINFRAME
LOWER
BEARING
ASSEMBLY
DRIVE SPROCKETS
DRIVE COVER
DRIVE BELT
LOWER BEARING ASSEMBLY
MAINTENANCE
COVER
RIGHT SIDE OF MULCHER
SKID STEER ONLY
EXCAVATOR ONLY
SAFETY
CHAINS
INSTALLATION
GENERAL INFORMATION
The DIGGA Series II Magnum Mulchers were designed to be easy to use and maintain. The 60”
mulchers are available with skid steer only mounting, excavator only mounting or a combination
mulcher that can be easily changed from skid steer mounting to excavator mounting. A special 60”
mulcher is designed for a universal skid steer hitch forestry vehicle. When installing a hydraulic 3-line
mulcher onto your prime mover a control box assembly #15754 or a pigtail adaptor harness for in-
cab controls is required to operate the deflector door.
NOTICE:
Do not operate the Digga Series II mulchers on standard flow hydraulic systems.
NOMENCLATURE
Throughout this manual, reference is made to various mulcher components. Study the following
diagrams to acquaint yourself with the various names of these components. The combination
mulcher is not shown but has components from both attachments shown below. This knowledge will
be helpful when reading through this manual or when ordering service parts. There is a complete
parts breakdown for each mulcher at the back of this manual.
PM-000102-A OCTOBER 2017
16
Summary of Contents for Magnum II Series
Page 2: ......
Page 56: ...Australian Designed and Manufactured PM 000102 A...
