19
ITEM 2
ITEM 3
ITEM 4
ITEM 5
9 SAFETY - STICKER LOCATION
PLACEMENT OR REPLACEMENT OF SAFETY SIGNS
1. Clean the area of application with on-flammable
solvent, then wash the same area with soap & water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing
the backing surface.
4. Apply the safety sign to the position shown in the
diagram above and smooth out any bubbles.
INSTRUCTIONS
• Keep all safety signs clean and legible.
• Replace all missing, illegible, or damaged safety signs.
• Replacement parts for parts with safety signs
attached must also have safety signs attached.
• Safety signs are available from your dealer or from
Digga Australia.
1
4
5
3
2
ITEM 1
ITEM NO. ORDER CODE
DESCRIPTION
QTY
1
DE-000063
SERIAL TAG (ITEM 1)
1
2
DE-000047
DECAL - DIGGA (SMALL)
1
3
DE-000075
DECAL - DIGGA (LARGE)
2
4
DE-000089
DECAL - WARNING
2
5
DE-000129
DECAL - PINCH POINT
2
Please Note: Both items are
located on the rear facing
surface of the upper RHS.
(Rectangular Hollow Section)