Network Setup
DHCP
– Use the Scroll Up/Down button to select DHCP. Press the OK button to enter the
DHCP menu. Use the Scroll Up/Down button to Enable/Disable. Press the OK button to set.
IP Address
– Use the Scroll Up/Down button to select IP Address. Press the OK button to
enter the IP Address menu. Use the Scroll Up/Down button to enter the IP Address. Use the
Scroll Up/Down menu to select the desired IP Address then press the OK button to set.
Repeat the process until the IP Address is completed. Press the OK button to set. Note: If
DHCP is enabled you will not be able to set an IP address. Select DHCP disabled if Static IP
Address required.
Subnet Mask
– Use the Scroll Up/Down button to select Subnet Mask. Press the OK button
to enter the Subnet Mask menu. Use the Scroll Up/Down button to enter the Subnet Mask.
Use the Scroll Up/Down menu to select the ,irst number of the desired Subnet Mask then
press the OK button to set. Repeat the process until the Subnet Mask is completed. Press
the OK button to set.
Gateway
– Use the Scroll Up/Down button to select Gateway Address. Press the OK button
to enter the Gateway Address menu. Use the Scroll Up/Down button to enter the Gateway
Address. Use the Scroll Up/Down menu to select the ,irst number of the desired Gateway
Address then press the OK button to set. Repeat the process until the Gateway Address is
completed. Press the OK button to set.
Back to Main-
Select Back to Main to escape the Web Management Network Setup
Menu.
17
HD-1605 Manual V1.0