background image

 

ORG Network ID 

– Use the Scroll Up/Down button to select ORG Network ID. Press the OK button

to enter the ORG Network ID menu. Use the Scroll Up/Down button to select the desired ID ranging
from 1 to 65535 then press the OK button to set.

 

Network Name 

– Use the Scroll Up/Down button to select Network Name. Press the OK button to

enter the Network Name menu. Use the Scroll Up/Down button to select the ,irst character for the
desired Network Name then press the OK button to set. Repeat the process for each character in the
desired Network Name. A Network Name can consist up to 16 characters.

 

Back to Main

Select Back to Main to escape the RF Setup Menu.

Encoder Setup Menu 

 

Program Num

 - 

U

se the Scroll Up/Down button to set 1 Program Num(Number). Press the

OK button to enter the Program Num menu. Use the Scroll Up/Down  to select Program
Num ranging from 1 to 65534 then press OK to set.

 

Channel Name

 

– Use the Scroll Up/Down button to select Channel Name. Press the OK

button to enter the Channel Name menu. Use the Scroll Up/Down menu to select the ,irst
character of the desired Channel Name then press the OK button to set. Repeat the process
until the Channel Name is completed. 

The Channel Name can be 7 characters long. Factory Default: CHANNEL-1.

PROVIDER NAME 

– Use the Scroll Up/Down button to select Provider Name. Press the OK

button to enter the Provider Name menu. Use the Scroll Up/Down menu to select the ,irst
character of the desired Provider Name then press the OK button to set. Repeat the process
until the Provider Name is completed. The Provider Name can be 16 characters long.

LCN

-Use the Scroll Up/Down button to set LCN. Press the OK button to enter The Source ID

menu.   Use   the   Scroll  Up/Down   to  set  the   Source  ID.  Range:   1  to   999.  Press  OK  to  set.
Factory default : 101.

 

HDCP

- Use the Scroll Up/Down button to select the HDCP menu- Use the Scroll Up/Down

button   to  select   the   HDCP   menu.  Press   the   OK   button   to  enter   the   HDCP   menu.   Select
Enable / Disable, and press OK to set.

NOTE:

 It is the installers / property owner / integrator's responsibility to contract with the

service provider regarding content authorization and the use of HDCP. 

Audio   Output

 

–  

Use   the   Scroll   Up/Down   button   to   select   Audio   Output.   Press   the   OK

button to enter the Audio Output menu. Use the Scroll Up/Down button to select the Audio
Output option: MP2 (MPEG1 Layer2 Audio), AAC. Factory default: MP2. Press the OK button
to set. 

                   16 

 HD-1605 Manual V1.0

Summary of Contents for HD-1605





















Reviews: