manualshive.com logo in svg

Dietz Sango Advanced F, User Manual, Page: 36 / 44

Share
Download
Dietz Sango Advanced F User Manual Download Page 36

10   Technical specifications 

10.1. Standards and requirements

This product complies with the provisions of the Medical Devices 

Directive and therefore carries the CE mark.

The wheelchair conforms to the following standards and requirements. This has 

been verified by independent test institutes.

Standard 

Description 

Weight 

of test 

dummy 

NEN-EN 12182 

(2012) 

Assistive products for persons with disability - 

General requirements and test methods

160 kg 

NEN-EN 12184 

(2014) Class B 

Electrically powered wheelchairs, scooters and 

their chargers – Requirements and test methods

160 kg 

ISO 7176-19 

(2009)

Wheeled mobility devices for use as seats in 

motor vehicles

102 kg 

Standard 

Description 

EU directive 93/42/EEC Applicable requirements as stated in Annex 2 
ISO 7176-8

Requirements and test methods for static, impact and

fatigue strengths

ISO 7176-9 

Climatic tests for powered wheelchairs

ISO 7176-14 

Power and control systems for electric wheelchairs - 

Requirements and test methods

ISO 7176-16 

Requirements for resistance to ignition of postural 

support devices

10.2. 

Specifications operating force

Min. 

Max. 

Unit 

Joystick 

2,5

3,5 

N 

Swinging away the controller 

20

50 

N 

Electronic switches 

2,1

3,5 

N 

Parking brake 

34,77

44,27

N 

Attaching the charger plug 

7,8

13,9

N 

10   Technical specifications 

36  -  SANGO ADVANCED / SLIMLINE

Summary of Contents for Sango Advanced F













































Reviews:

No comments