manualshive.com logo in svg

Dietz Sango Advanced F, User Manual, Page: 35 / 44

Share
Download
Dietz Sango Advanced F User Manual Download Page 35

9.4.  Disposing of the wheelchair 

The technical lifetime of the wheelchair is influenced by the extent to which it 

is used.  Under normal use and with the prescribed maintenance, the expected 

technical lifetime of the wheelchair is approximately seven years. In order to derive 

maximum benefit from the lifetime of the wheelchair, ensure that it undergoes 

regular maintenance (see 9).

If your wheelchair is no longer required or needs to be replaced, it will 

usually be possible to arrange for your dealer to take it back. If this 

should not be possible, consult with your local authority to find out if 

it can be recycled or if the materials used in it can be processed in an 

environmentally friendly way.  

Various plastics and metals were used in the manufacture of the wheelchair. It 

also contains electronic components that should be disposed of appropriately. The 

batteries constitute chemical waste.

SANGO ADVANCED / SLIMLINE  -  35

9   Wheelchair maintenance 

Summary of Contents for Sango Advanced F













































Reviews:

No comments