5.3. Seat height and seat angle
setting
The seat height can be permanently
adjusted according to the user's specific
situation. All of the optional seat heights
fall within the maximum safe slope of
6˚ (10.5%), as set out in EN 12184 (2014)
class B. Lowering the seat height will have
a positive effect on overall and dynamic
stability.
1.
Loosen the bolt (A figure 10).
2. Position the bolt in the hole (B)
corresponding to the desired position.
3. Tighten the bolt.
Warning
By increasing the seat height you also
raise the centre of gravity. This has a
negative effect on overall and dynamic
stability.
5.4. Seat depth setting
1. Loosen the allen screws (A) on each
side by one turn (figure 11).
2. Slide the seat frame (B) into the
desired position.
3. Tighten the allen screws.
5.5. Seat width setting
The seat width can be adjusted by
changing the leg rest and/or armrest
width (see 5.8 and 5.9).
5.6. Backrest angle setting
1. Loosen the two allen screws (A) by one
turn (figure 12).
2. Adjust the backrest (B) to the desired
angle.
3. Tighten the allen screws.
1
2
A
B
B
A
2
1
B
A
1
2
1
A
B
11
10
12
5 Wheelchair settings (qualified specialists only)
SANGO ADVANCED / SLIMLINE - 15