LED Digital MLG-035
NORMAL TIME DISPLAY
1. Press A to display time for 8 seconds.
2. Press A again (while display is on) to change mode. Mode sequence is time, date.
NOTE: Animation will be displayed before time or date for 2 seconds.
NOTE: If no pusher is operated for 8 seconds, settings will be saved and the display will return to normal time
display.
TIME SETTING
1. Press A to display time.
2. Press and hold B, 12/24 hour format will begin flashing.
3. Press A to select 12/24 hour format.
NOTE: In 12-hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
4. Press B to set and advance to hour.
5. Press A to advance digit; press and hold A for fast advance.
6. Press B to set and advance to next setting value.
7. Setting sequence is: 12/24 hour format, hour, minutes.
8. Press B to save and exit setting mode.
DATE SETTING
1. Press A to select date mode.
2. Press and hold B, date will begin flashing.
3. Press A to advance digit; press and hold A for fast advance.
4. Press B to set and advance to month.
5. Press A to advance digit; press and hold A for fast advance.
6. Press B to save and exit setting mode.
(A)
(B)
OLED MODULE
The display is normally off. To activate display, press A for date display with scrolling time (Figure 1), or press B for time/date
display with animation (Figure 2).
NOTE: Animation is randomly selected from 4 designs. Press B to change animation.
TIME/DATE SETTING
1. When the display is activated, press and hold A for 2 seconds to enter setting mode. Hour will begin flashing.
2. Press B to advance digit. Press and hold B for fast advance.
3. Press A to set and advance to next setting value.
4. Setting sequence is hour, minute, month, date, year, 12/24 hour format.
5. After the minute has been set, the seconds will reset to zero.
6. After 12/24 hour format has been selected, settings will be saved and the display will automatically return to time display.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to time display.
(B)
(A)
Figure 1
Figure 2
(B)
(A)
Curved LED Digital MLL-045
NORMAL TIME DISPLAY
1. Press B for time display and animation.
2. Press B again to toggle time/date mode.
3. When time or date is displayed, press and hold B for 3 seconds to toggle horizontal/vertical display.
TIME AND DATE SETTING
1. From time display, press and hold A; 12/24 hour format will begin flashing.
2. Press B to select 12/24 hour format.
NOTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m.
time.
3. Press A to set and advance to hour.
4. Press B to advance digit.
5. Press A to set and advance to next setting value.
6. Setting sequence is: 12/24 hour format, hour, minutes, date, month.
7. Press A to save and exit setting mode.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time
display.
PERSONAL MESSAGE SETTING
1. Press B to display time, press B again to display date, press and hold A; first letter of message will begin flashing.
2. Press B to select character.
3. Press A to set and advance to the next character.
4. Repeat steps until desired message. Please note there are only ten spaces available.
(A)
(B)
