DIEBOLD NIXDORF BEETLE /iSCAN EASY eXpress+, Service Manual

Page: 12 / 65

Service Manual BEETLE /iSCAN EASY
6
• The BEETLE /iSCAN EASY eXpress is the culmination of cutting-edge technology.
Therefore, please also ensure that the BEETLE /iSCAN EASY eXpress is operated under
modern building and technical conditions in order to ensure smooth and efficient opera-
tion. The device and other information technology hardware should only be connected to
a power supply system using a separate protective earth (PE) wire. This type of power
supply system is referred to as a TN-S network. Do not use PEN conductors.
Also follow the recommendations set out in DIN VDE 0100 Part 540, Appendix C2 as well
as EN50174-2, Section 5.4.3 (www.DIN.en). This will help avoid malfunctions.
• National Electrical Code ANSI/NFPA 70 (NEC)
• Canadian Electrical Code, part I, CSA C22.1 (CE Code)
• The device should only be transported in its original packaging (to protect it against shock
and impact).
• Always keep the ventilation slots free of obstruction to ensure adequate air circulation
and avoid overheating.
• If the device comes with a lithium battery, make sure the battery is replaced by an
equivalent type. Otherwise there is a risk of explosion! Lithium batteries must only be re-
placed by identical types or by other types recommended by the manufacturer.
• The batteries must be disposed of according to local regulations for the disposal of haz-
ardous waste.
5.1 Connecting peripherals
Devices should only be connected using shielded cables in order to ensure compliance with
international regulations and standards for radiation emissions and to achieve a high immuni-
ty to external interference.