DIEBOLD NIXDORF BEETLE /iSCAN EASY eXpress+, Service Manual

Page: 19 / 65

BEETLE /iSCAN EASY Service Manual
13
11 Start/Shut down of the system
11.1 Start the system
CAUTION
An IEC60127-compliant 16A fuse (breaking capacity of 1500A) must be part
of the building installation.
The power supply must be equipped with separately routed protective con-
ductors. This type of power system is referred to as a TN-S network. Do not
use PEN conductors!
NOTICE
The system operates automatically when the power plug is plugged into the
building installation.
If this does not work, please open the device (see Section "Opening the K-
one") and press the ON/OFF button on the BEETLE /III in order to switch
on the system (see figure below).
If the display do not light up, press the power button on the panel of the display (see chapter
“Display Settings”) to switch it on.
PC
Position of the
ON/OFF button