Dictaphone Walkabout 5210, User Manual, Page: 60 / 66

52
Walkabout™ 5210 User Guide
6. Disconnect the recorder from the PC and turn the recorder
on. The recorder’s display shows
LOAD UPDATE?
7. Observe the tips noted below and press the
OK
button to
verify that you want to perform the firmware update.
8. When the firmware version update is complete, you can
use the same MultiMediaCard to update one or more other
Walkabout 5210 recorders. When all updates are
complete, reformat the card (see Format Card on page 22)
to remove the update files from the card and to facilitate
using the card with the new firmware.
Tips:
• The firmware update is best carried out using an empty
MultiMediaCard that was previously used in the
Walkabout 5210 recorder and that has no dictations
stored on it.
• Always use new or fully charged batteries, or a power
pack, with the recorder to perform a firmware update.
A power failure or low batteries during transfer can
cause damage to the recorder.
• Do not interrupt the firmware update for any reason, as
this can cause damage to the recorder.