-6-
Base Stand Assembly Instructions
Prepare to place the TV with the display side down onto a flat surface. Due to the size and weight of
this TV, the use of 2 people is recommended when moving it. Ensure the table or desk you use provides
a flat, totally clean surface, and use a soft cloth between the face of the TV and the table to help protect
the TV's screen.
Thank you for purchasing this Dick Smith 41.5" UHD LED LCD TV. Before connection and operation of this
product, please read through this User Manual carefully, and retain the manual for future reference.
Remove the TV carefully from its packaging, taking care not to apply any pressure to the front of the LCD
screen. Some accessory items may be located in cut-out sections of the internal packaging, so take care not
to miss these items. Once all items are removed from the packaging, use the list below to check that nothing
is missing. If any items appear to be missing, contact the retail store that supplied the TV, or use the Support
contact details at the end of this manual for further information.
●
41.5" (105.5cm) LED LCD TV 1 piece
●
Desk base stand 1 piece
●
Neck brackets (links TV body & base stand) 2 pieces
●
User Manual 1 piece
●
Remote Control 1 piece
●
Pack of screws (4 x short, 4 x long) 1 piece
●
Pack of 2 "AAA" size batteries 1 piece
●
Pack of 4 M6 wall-mount screws 1 piece
Once all the accessory items have been accounted for, prepare a location where you can attach the desk base
stand to the body of the TV. You will need to arrange a soft cloth that is large enough to cover the front face of
the TV (for protection of the LCD screen), as well as a Philips head screwdriver to attach the base stand.
Before proceeding to the Getting Started section of this manual, please continue reviewing this Installation
chapter to ensure that your TV is correctly connected to your TV antenna and related AV equipment (eg. DVD
or Blu-ray player, amplifier, sound bar etc).
Unpacking and preparing the TV
INSTALLATION
1) Position the base stand on a flat surface in front of you as per Fig 1 below. The rubber feet on the front
section of the stand should be facing downwards towards the surface the stand is sitting on.
2) Locate the right-angled Neck bracket with the L (Left) symbol on the top of the flat surface near the
screw holes, and screw it to the left side of the base stand using 2 of the supplied short Philips-head
screws. Repeat the process for the Neck bracket with the R (Right) symbol on it.
3) Position the TV's body on your desk or table so that the bottom of the TV is extending slightly over the
edge of the table when viewed for above. Position the assembled base stand as per Fig 2 below (with the
front section of the stand pointing away from you when viewed from above the rear of the TV).
4) Slide the ends of the neck brackets from the base stand into the rectangular holes in the bottom area
of the TV's body, and when correctly located, slowly and evenly push them into the body of the TV until
they are seated into position.
5) Secure the neck brackets in place using the longer Philips-head screws, as per Fig 3.
Neck bracket
(Left)
Neck bracket
(Right)
TV Stand Base Front
Fig 1.
Fig 2.
Fig 3.
