MENU SETTINGS
-16-
To access the Input Source menu, where you can select ATV or DTV reception, plus access signals from
your connected Audio/Video devices (eg, via AV Composite video, HDMI, or PC VGA), press the Input
Source button located at the top right-hand side of the cursor selector arrow section of the Remote
Control, and once the Input Source menu appears, use the Up or Down cursor arrow keys to select the
desired input, then press the OK button.
Input Source
DTV
ATV
PC
HDMI1
AV
HDMI2
1.CHANNEL MENU
The first item of the MENU is the Channel menu (for ATV or DTV source only). ATV = Analogue TV, DTV = Digital TV.
2). DTV Manual tuning:
You can select a DTV channel and find out how many programs are being transmitted on that channel.
Press to select the channel, then press OK to search the programs .
NOTE:
The
Bad Normal Good bar graph on this screen shows the relative signal intensity during DTV reception only.
To obtain more detail regarding the signal quality and strength of a received DTV station, refer to the Signal
Information option in this Menu.
DTV Manual Tuning
VHF CH 5
_
+
Bad
Nomal
Good
Press OK to search
1). Auto Tuning:
When Auto Tuning is manually selected via the Channel Menu, the TV will default to tuning the DTV stations only
(unless you manually select the other options of ATV or ATV+DTV).
HDMI3
USB
ATV Manual Tuning
Programme Edit
Signal Information
< >
CHANNEL
Auto Tuning
DTV Manual Tuning
Software Update(USB)
Software Update(OAD)
OAD Tuning
Press to select search type, then press to select country (eg. Australia), then press the OK
button to start auto tuning.
All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is set to DTV+ATV.
Any previously stored channels will be deleted after auto tuning is carried out.
After auto tuning, the receiver will skip to the first DTV channel.
The radio channels are the ones provided by some TV stations. This unit does not receive DAB+
Digital Radio broadcasts.
