Dibo 1D CPU M Series, Instruction Manual

Page: 50 / 85

DiBO n.v. 50
Ton = stationary time - blue button: calibration, white button: regulation (begin- and end values of calibration).
Toff = rinsing time - blue button: calibration, white button: regulation (begin- and end values of calibration).
Example photo:
- Toff calibration: position 1 at regulation 1-10 min, then the regulation time shall be 1 minute, at position 10 this
will be 10 minutes.
- Ton calibration: position 3.5 at regulation 6-60 min, then the regulation time shall be approx. 20 minutes, at
position 10 this will be 60 minutes.
4.8. Scope of application
(I¿FLHQWKLJKSUHVVXUHFOHDQLQJLVDFKLHYHGE\IROORZLQJDIHZJXLGHOLQHVFRPELQHGZLWK\RXURZQH[SHULHQFHV
(DFKFOHDQLQJMRELVGLIIHUHQWDQGVSHFL¿FWKHUHIRUHFRQWDFW'L%2IRUWKHEHVWVROXWLRQLQ\RXUDSSOLFDWLRQVHFWRU
Using cleaning products (if applicable): the surface to clean should be sprayed so the product can act during
some time (do not let it dry!) before cleaning with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
Always follow/consider the safety instructions of the used product!
Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and rinsing.
Hot water (high pressure) cleaning (if applicable): the cleaning effect will be such improved through increasing
the temperature (set the temperature experimentally according to the application).
Cleaning via lance with rotating head (if applicable): cleaning method to remove tough layers of dirt.
Cleaning using a steam lance (if applicable): this steam function (by overheating water) is used in ‘sensitive’
cleaning applications (eg: damage sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by
using steam.
Please note: this application has high cleaning temperatures and requires various safety measures!
Mist sprinkler switch