16
COMPONENT NAMES (continued)
Remote Control
Installing the Batteries
Handling the Remote Control
1. Open the battery cover.
Slide back and remove the battery cover in
the direction of the arrow.
2. Installing the batteries.
Install two included Size AAA batteries
observing the correct pola,-).
Use the remote control within about 16 feet from front of the unit’s remote-
control sensor and within 30 degrees on both sides.
3. Close the battery cover.
Replace the battery cover in the direction of
the arrow and snap it back into place.
Do not mix new and old batteries together. The batteries could explode or leak,
resulting in fires, physical injury, or stains.
When inserting batteries, observe their correct polarities as marked on the
product. If inserted in the wrong direction, the batteries could explode or leak,
resulting in fires, physical injury, or stains.
ATTENTION
Do not drop the remote control.
To avoid possible failures, do not splash the remote control with water or
put it on a wet object.
If leaving the remote control out of use for an extended period of time,
remove the batteries from it.
If the remote control does not respond properly, replace the batteries.
Strong light such as direct sunlight exposed on the photoreceptor of the
remote control can cause operational failure. Position this unit to avoid
direct contact with such light.
LED INDICATION
AV4
ASEPCT
PICTURE
HOLD
MENU
PROGRAM / ADJUST (
)
DISPLAY
TV TUNER
SOURCE
PC
TEXT
MUTE
NUMBER KEYPAD
Within 30 degrees
Within 30 degrees
About 10 feet
About 10 feet
About 16 feet
CAUTION
INDEX
SUB
AV1
MODE
REVEAL
CANCEL
SIZE
AV2
HDMI
AV3
ENTER
I/II
SELECT (
)
RETURN
RECALL
SLEEP
VOLUME (
)
CH (
) or power
on
POWER ON/OFF
